2002
John Deere 250
Skid Steer Loader
Hours 36.3 (Est. 1500-2000 hours)
This machine is in excellent condition, it has a great set of tires on it that have lots of life left in them. The machine is equipped with a sturdy smooth edge bucket that has a place to bolt on teeth. It has auxiliary hydraulics along with hand/feet controls. We estimate the machine has between 1500-2000 hours due to our experience with machines of it's year and condition. Starts easy, runs strong! Ready To Work!
John Deere 250 Skid Steer Loader
Selected Dimensions
| A. Length with Bucket |
10.5 ft in |
3196 mm |
| B. Width Over Tires |
5.8 ft in |
1776 mm |
| C. Height to Top of Cab |
6.4 ft in |
1950 mm |
| D. Wheelbase |
3.5 ft in |
1075 mm |
| E. Ground Clearance |
9.6 in |
244 mm |
| F. Length w/o Bucket |
8.5 ft in |
2591 mm |
| G. Clearance at Max Lift and Dump |
7.5 ft in |
2290 mm |
| H. Reach at Max Lift and Dump |
28.1 in |
715 mm |
Specification
| Make |
John Deere |
| Model |
3029T |
| Gross Power |
64.4 hp |
48 kw |
| Net Power |
61 hp |
45.5 kw |
| Power Measured @ |
2400 rpm |
| Displacement |
179 cu in |
2.9 L |
| Number of Cylinders |
3 |
| Operational Weight |
6250 lb |
2835 kg |
| Fuel Capacity |
15 gal |
57 L |
| Cooling System Fluid Capacity |
2.8 gal |
10.6 L |
| Hydraulic System Fluid Capacity |
6 gal |
23 L |
| Max Speed |
8.5 mph |
13.7 km/h |
| Operating Voltage |
12 V |
| Alternator Supplied Amperage |
55 amps |
| Operating Load Rating |
1750 lb |
794 kg |
| Tipping Load |
3600 lb |
1633 kg |
| Breakout Force |
5500 lb |
2495 kg |
| Pump Type |
Hydrostatic |
| Pump Flow Capacity |
17.6 gal/min |
66.6 L/min |
| Relief Valve Pressure |
3100 psi |
21374 kPa |
| Length with Bucket |
10.5 ft in |
3196 mm |
| Length w/o Bucket |
8.5 ft in |
2591 mm |
| Width Over Tires |
5.8 ft in |
1776 mm |
| Height to Top of Cab |
6.4 ft in |
1950 mm |
| Clearance at Max Lift and Dump |
7.5 ft in |
2290 mm |
| Wheelbase |
3.5 ft in |
1075 mm |
| Ground Clearance |
9.6 in |
244 mm |
| Reach at Max Lift and Dump |
28.1 in |
715 mm |
| Turning Radius from Center - machine rear |
61.4 in |
1559 mm |
| Turning Radius from Center - inc bucket |
78.9 in |
2004 mm |
|
|
