2005
Case 60XT
Skid Steer Loader
Hours 2416
This machine is in great running condition, it has dual hand controls that control both steering and attachment movements in the machine. It has good tires at about 80-90% use left in them. The machine has auxiliary hydraulics and a smoothed edge bucket that teeth can be attached too if needed. Starts easy, Runs Strong, Ready To Work!
Case 60XT Skid Steer Loader
Selected Dimensions
| A. Length with Bucket |
10.6 ft in |
3230 mm |
| B. Width Over Tires |
5.3 ft in |
1630 mm |
| C. Height to Top of Cab |
6.4 ft in |
1950 mm |
| D. Wheelbase |
3.6 ft in |
1100 mm |
| E. Ground Clearance |
9 in |
229 mm |
| F. Length w/o Bucket |
8.7 ft in |
2640 mm |
| G. Clearance at Max Lift and Dump |
8 ft in |
2450 mm |
| H. Reach at Max Lift and Dump |
21.3 in |
540 mm |
Specification
| Make |
Case |
| Model |
4-390 |
| Gross Power |
75 hp |
55.9 kw |
| Net Power |
69 hp |
51.5 kw |
| Power Measured @ |
2200 rpm |
| Displacement |
239 cu in |
3.9 L |
| Number of Cylinders |
4 |
| Aspiration |
Natural |
| Operational Weight |
6562 lb |
2976.5 kg |
| Fuel Capacity |
22 gal |
83.3 L |
| Cooling System Fluid Capacity |
4.4 gal |
16.6 L |
| Engine Oil Fluid Capacity |
2.7 gal |
10.4 L |
| Hydraulic System Fluid Capacity |
13.3 gal |
50.2 L |
| Chain Box Fluid Capacity - each side |
1.5 gal |
5.7 L |
| Max Speed |
7 mph |
11.3 km/h |
| Tire Size |
12.00x16.5 |
| Operating Voltage |
12 V |
| Alternator Supplied Amperage |
65 amps |
| Operating Load Rating |
1800 lb |
816.5 kg |
| Tipping Load |
3600 lb |
1632.9 kg |
| Breakout Force |
4431 lb |
2009.9 kg |
| Bucket Capacity |
0.56 yd3 |
0.43 m3 |
| Pump Type |
gear pump |
| Pump Flow Capacity |
21 gal/min |
79.5 L/min |
| Relief Valve Pressure |
3000 psi |
143.6 kPa |
| Length with Bucket |
10.6 ft in |
3230 mm |
| Length w/o Bucket |
8.7 ft in |
2640 mm |
| Width Over Tires |
5.3 ft in |
1630 mm |
| Height to Top of Cab |
6.4 ft in |
1950 mm |
| Clearance at Max Lift and Dump |
8 ft in |
2450 mm |
| Wheelbase |
3.6 ft in |
1100 mm |
| Ground Clearance |
9 in |
229 mm |
| Reach at Max Lift and Dump |
21.3 in |
540 mm |
| Turning Radius from Center - machine rear |
59.1 in |
1500 mm |
| Turning Radius from Center - inc bucket |
76.8 in |
1950 mm |
|
|
